Autometer Gauges

[home]   -   [about me]   -   [mustang]

|  .modifications list.      |      .times.      |      .pictures.     |      .videos.   |

What's a modded stang without the addition of Autometer Gauges?  First addition was the autometer triple pillar pod with Electrical water temp, oil pressure, and A/F Ratio.  I went with the Pro-Comp silver series to compliment the billet interior pieces and exterior color.  I then added an Autometer Monster Tach as a birthday present from Jenni and replaced the yellow shift-light lens with a cool blue lens.  Here are a load of pictures of the gauge setup. 

Autometer Pillar Gauges

A good shot of my driving view...	Just out of the box..	Oil Pressure	Water Temp	A/F Ratio
Freshly Installed	Outside Shot	Another	Picture showing the backlight

Autometer Monster Tach (10k RPM) w/ Shift Light

I couldn't decide where to place the tach.  I first thought to put it just below the pillar between the windshield in the dash, but then I realized I would have to drill holes.  Luckily I came across a tach bracket that mounts behind the dash and doesn't require ANY drilling.  It looks great and has a great finish.  Also, with the addition of an aftermarket tachometer on 99+ Mustangs a tach adapter is required (see pics).  I decided to go with the Pony Express Tach Adapter because the installation process was MUCH easier than that of other models.

Tach w/ stock yellow lens/cover	Another side shot	another	looking in..	The yellow flash...
The new and improved blue cap/lens.	With the new blue cap	The new blue lens (the tach has since been rotated to level)	bracket	bracket
bracket	Pony Express Performance Tach Adapter